Resin Assembly & Care Guide
Welcome to the world of VoidSiege! This guide provides essential information on assembling, cleaning, and maintaining your resin miniatures to ensure they remain in top condition for years to come.
1. Understanding Your Resin Miniatures
Resin miniatures are highly detailed and require proper care during assembly and painting. Unlike plastic or metal miniatures, resin is more fragile and must be handled with care.
2. Safety Precautions
- Work in a well-ventilated area when sanding or cutting resin.
- Use a dust mask and gloves to prevent inhalation and skin irritation.
- Keep resin parts away from children and pets due to small components.
3. Cleaning Your Miniatures
Before assembly, wash your resin miniatures to remove mold release agents:
- Fill a bowl with warm, soapy water (use dish soap).
- Gently scrub parts with an old toothbrush.
- Rinse thoroughly and let dry completely before assembling.
4. Assembly Instructions
a. Checking & Preparing Parts
- Inspect all parts and trim any excess flash or mold lines with a hobby knife or fine sandpaper.
- Test fit parts before gluing to ensure a seamless assembly.
b. Gluing Resin Miniatures
- Use super glue (cyanoacrylate glue) for a strong bond.
- Apply a small amount to one surface and press firmly together.
- Hold for a few seconds, then let cure fully.
- Pinning: For larger parts, consider drilling small holes and inserting wire for added stability.
c. Filling Gaps
- Use green stuff or liquid putty to fill small gaps or seams.
- Smooth with a damp tool before drying, then lightly sand.
5. Priming & Painting
a. Priming Your Miniatures
- Use resin-compatible primer (spray or brush-on).
- Apply in thin, even layers to avoid loss of detail.
- Let dry completely before painting.
b. Painting Tips
- Use thin layers of acrylic paint.
- Apply washes and highlights to enhance detail.
- Seal with a matte or gloss varnish to protect the paint job.
6. Storage & Maintenance
- Store miniatures in a padded case or box to prevent damage.
- Avoid prolonged exposure to direct sunlight or extreme temperatures.
- Handle with care, especially with small or delicate parts.
7. Repairing Broken Parts
If a part breaks:
- Use super glue for clean breaks.
- If needed, pin the part for extra strength.
- Touch up with primer and paint after repairs.
Following these guidelines will help ensure your VoidSiege miniatures stay in excellent condition, ready for battle! If you have any questions, reach out to our community for additional tips and support.
Happy wargaming!
